venusos-device

Battery Monitor driver for serial battery in VenusOS GX systems

Battery Monitor driver for serial battery in VenusOS GX systems

This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.

This Venus OS driver gets the data from MQTT and displays it as pv inverter.

This Venus OS driver gets the data from MQTT and displays it as battery.

This Venus OS driver gets the data from MQTT and displays it as solar charger.

This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery drivers but no MultiPlus-II.

This Venus OS driver gets the data from the Enphase Envoy-S and displays it as PV Inverter. It works for all phase combinations. Additionally it's possible to post the data to multiple MQTT topics to ...

Integrate Open_EVSE charger into Victron Energies Venus OS

This Venus OS driver gets the data from MQTT and displays it as temperature sensor.

This Venus OS driver gets the data from MQTT and displays it as EV charger.

Ant Bms decoding / encoding and transfer to Venus Gx, Cerbo, bbb ect for Ve.Can input. (CAN protocol according to RecBms, BYD, LG ect)

This driver/package allows you to use ngrok on Venus OS and configure it over GUI. Ngrok allows you to access a specific port without forwarding the port.

Documentation of the venus-os_dbus-serialbattery repository

Service to use Janitza Meters with Venus OS

Emulates up to 2 separate tank level sensors in VenusOS from MQTT data

Emulates up to 5 separate temperature sensors in VenusOS from MQTT data

Emulates a physical AC Charger from info in MQTT data

A driver to integrate the Enphase Envoy device with Victron Venus OS as a PV Inverter. The Envoy provides data from the IQ7 micro inverters.