Trial port of the rtl_433 Library for use with OpenMQTTGateway on a ESP32 and a CC1101 Transceiver
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.
This firmware is an alternative to the EvilCrowRF default firmware. Module: CC1101 - Compatible Flipper Zero file.
RF tool based on CC1101 module and Arduino Pro Micro 8VMHz/3.3V. Allows using CLI with human readable commands to control CC1101 board over USB interface. Putty or any other serial terminal can be use...
A low cost, jack-of-all-trades hacking tool, taking inspiration from FlipperZero and P4wnP1, using the RPIZero
driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi
Arduino library for interfacing with CC1101 transceivers.
Example of using CC1101 module with Arduino Pro Micro ( ATMEGA32U4 ) for radio jamming
Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121
Python Library & Command Line Tool to Transmit RF Signals via CC1101 Transceivers
System to capture digital signaldata and transfer them to another system
ESP32 driver library for TI CC1100 Low-Power Sub-1 GHz RF Transceiver
Analyzer for radio telegrams in a HomeMatic environment
CC1101 Low-Power Sub-1 GHz RF Transceiver driver for esp-idf